BASF works closely with key machine manufacturers to continually optimize coating technologies and new plant concepts. By using our installations, customers can maintain their daily production capacity while simultaneously pursuing product development. Our support can facilitate the decision-making for a change of technology or new investment.
Our dispersion facility is the fastest and most flexible trial facility for adhesives in the world, allowing each set-up to be individually tailored and adapted. Customers can test all common coating systems, as well as the latest and as yet unestablished techniques. The pilot coater for acResin® demonstrates the advantages of the UV acrylic hotmelt.
BASF Coating Center Imagefilm
|Technical data||Dispersions||UV-curable acrylic hotmelts|
|Coating speed min. / max.|| 5 / 1800 mpm
||15 / 700 mpm|
|Oven length / UV lamps
|| 48 m
||8 x 170 W/cm|
||16 (8 upper air, 8 lower air)|
|Temperature min. / max.
||60 / 160 °C|
|Width coating substrate
|Width laminating substrate
||76 or 152mm / 3 or 6 inch||76 or 152mm / 3 or 6 inch|
|Diameter rolls max.
|Available coating systems||Dispersions||UV-curable acrylic hotmelts|
|Double chamber gravure system
||Slot die with rotating bar|
|3 different single chamber gravure systems||Curtain die|
|Reverse gravure||Kiss coat|
|Triple layer slide curtain|
|Dual layer slide curtain|
|Dual layer slot die|
|Rewinding unit||Dispersions||UV-curable acrylic hotmelts|
|Size of trial||Dispersions||UV-curable acrylic hotmelts|
|Length of paper or film min.||3000 linear meter
(backing and front substrate)
|500 linear meter
(depending on V:mpm)
|Quantity of adhesive